General Decision Number: WA120079 04/06/2012 WA79 Superseded General Decision Number: WA20100094 State: Washington Construction Type: Heavy including water and sewer line construction County: Okanogan County in Washington. HEAVY CONSTRUCTION PROJECTS (including sewer/water construction). Modification Number Publication Date 0 01/06/2012 1 01/13/2012 2 02/10/2012 3 04/06/2012 CARP0001-016 06/01/2011 OKANOGAN WHICH LIES EAST OF THE 120TH MERIDIAN Rates Fringes CARPENTER (Including Form Work)............................$ 30.00 11.84 MILLWRIGHT.......................$ 29.73 10.56 ZONE PAY: ZONE 1 0-40 MILES FREE ZONE 2 41-65 MILES $2.25/PER HOUR ZONE 3 66-100 MILES $3.25/PER HOUR ZONE 4 OVER 100 MILES $4.75/PER HOUR DISPATCH POINTS: CARPENTERS/MILLWRIGHTS: PASCO (515 N. Neel Street) or Main Post Office of established residence of employee (Whichever is closest to the worksite). CARPENTERS: SPOKANE (127 E. AUGUSTA AVE.) or Main Post Office of established residence of employee (Whichever is closest to the worksite). CARPENTERS: WENATCHEE (27 N. CHELAN) or Main Post Office of established residence of employee (Whichever is closest to the worksite). CARPENTERS: COEUR D' ALENE (1839 N. GOVERNMENT WAY) or Main Post Office of established residence of employee (Whichever is closest to the worksite). CARPENTERS: MOSCOW (302 N. JACKSON) or Main Post Office of established residence of employee (Whichever is closest to the worksite). HAZMAT PROJECTS: Anyone working on a HAZMAT job (task, where HAZMAT certification is required, shall be compensated at a premium, in addition to the classification working in as follows: LEVEL D+ $.25 per hour - This is the lowest level of proection. No respirator is used and skin proection is minimal. LEVEL C+ $.50 per hour - This level uses an air purifying respirator or additional protective clothing. LEVEL B+ $.75 per hour - Uses same respirator protection as Level A. Supplied air line is provided in conjunction with a chemical "splash suit." LEVEL A+ $1.00 per hour - This level utilizes a fully encapsulated suit with a self-contained breathing apparatus or a supplied air line. ---------------------------------------------------------------- CARP0770-005 06/01/2011 OKANOGAN COUNTY WHICH LIES WEST OF THE 120TH MERIDIAN Rates Fringes Carpenters: (Including form work)............................$ 25.25 12.60 MILLWRIGHT.......................$ 36.39 12.60 (HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities: Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend Zone Pay: 0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour (HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT AND PILEDRIVER ONLY) Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center Zone Pay: 0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour ---------------------------------------------------------------- ELEC0077-001 02/01/2010 Rates Fringes Line Construction: LINEMEN.....................$ 42.27 13.54 ---------------------------------------------------------------- ELEC0191-015 07/01/2011 Rates Fringes ELECTRICIAN......................$ 35.71 15.24 ---------------------------------------------------------------- ENGI0302-008 06/01/2011 OKANOGAN COUNTY WHICH LIES WEST OF THE 120TH MERIDIAN Rates Fringes Power equipment operators: Group 1A...................$ 35.79 15.15 Group 1AA..................$ 36.36 15.15 Group 1AAA.................$ 36.92 15.15 Group 1.....................$ 35.24 15.15 Group 2.....................$ 34.75 15.15 Group 3.....................$ 34.33 15.15 Group 4.....................$ 31.97 15.15 Zone Differential (Add to Zone 1 rates): Zone 2 (26-45 radius miles) - $1.00 Zone 3 (Over 45 radius miles) - $1.30 BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima POWER EQUIPMENT OPERATORS CLASSIFICATIONS GROUP 1AAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments) GROUP 1AA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom; Excavator/Trackhoe, Backhoes: Over 90 metric tons GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; excavator/Trackhoe, backhoes: over 50 metric tons to 90 metric tons GROUP 1 - Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator/Trackhoe, backhoes: over 30 metric tons to 50 metric tons; Loader- overhead 6 yards to, but not including 8 yards; Dozer D-10 GROUP 2 - Cranes, 20 tons thru 44 tons with attachments; Crane-overhead, bridge type-20 tons through 44 tons; Excavator/Trackhoe, backhoe: 15 to 30 metric tons; Loaders-overhead under 6 yards; Mechanic; Grader (finishing) GROUP 3 - Cranes-thru 19 tons with attachments; A-frame crane over 10 tons; Dozers-D-9 and under; Roller-Plant Mix; Excavator/Trackhoe, backhoe: under 15 metric tons; Forklift: 3000 lbs and over with attachments; Oiler; Grader (non-finishing); Boom Truck over 10 tons GROUP 4 - Cranes-A frame-10 tons and under; Roller-other than plant mix; Forklift: under 3000 lbs with attachments; Boom Truck 10 tons and under ---------------------------------------------------------------- ENGI0370-008 06/01/2011 OKANOGAN COUNTY WHICH LIES EAST OF THE 120TH MERIDIAN Rates Fringes Power equipment operators: GROUP 1.....................$ 24.76 12.05 GROUP 2.....................$ 25.08 12.05 GROUP 3.....................$ 25.69 12.05 GROUP 4.....................$ 25.85 12.05 GROUP 5.....................$ 26.01 12.05 GROUP 6.....................$ 26.29 12.05 GROUP 7.....................$ 26.56 12.05 GROUP 8.....................$ 27.66 12.05 ZONE DIFFERENTIAL (Add to Zone 1 rate): Zone 2 - $2.00 Zone 1: Within 45 mile radius of Spokane, Pasco, Washington; Lewiston, Idaho Zone 2: Outside 45 mile radius of Spokane, Pasco, Washington; Lewiston, Idaho POWER EQUIPMENT OPERATORS CLASSIFICATIONS GROUP 1: Rollers, all types on subgrade, including seal and chip coatings GROUP 2: Fork Lift GROUP 3: Bulldozer (up to D-6 or equivalent) GROUP 4: Loaders (overhead & front-end, under 4 yds. R/T); Oiler GROUP 5: Backhoe (Under 45,000 gw); Trackhoe/Excavator (under 3/4 yd.); Cranes (25 tons & under); Boom Truck (Under 25 tons) GROUP 6: Asphalt Roller; Backhoe (45,000 gw and over to 110,000 gw); Trackhoe/Excavator (3/4 yd. to 3 yd.); Cranes (over 25 tons, to and including 45 tons), Bulldozer, 834 R/T & similar; Loader Operator (front-end & overhead, 4 yds. incl. 8 yds.); Mechanic GROUP 7: Backhoe (Over 110,000); Trackhoe/Excavator (3 yds & over); Cranes (over 45 tons to but not including 85 tons); Loaders (overhead & front-end, over 8 yds. to 10 yds.); Grader/Blade GROUP 8: Cranes (85 tons and over, and all climbing, overhead,rail and tower); Loaders (overhead and front-end, 10 yards and over) BOOM PAY: (All Cranes, Including Tower) 180 ft to 250 ft $ .50 over scale Over 250 ft $ .80 over scale NOTE: In computing the length of the boom on Tower Cranes, they shall be measured from the base of the Tower to the point of the boom. HAZMAT: Anyone working on HAZMAT jobs, working with supplied air shall receive $1.00 an hour above classification. ---------------------------------------------------------------- * IRON0014-001 01/01/2012 Rates Fringes IRONWORKER (Reinforcing and Structural)......................$ 31.35 20.10 ---------------------------------------------------------------- LABO0238-002 06/01/2011 Rates Fringes LABORER (Pasco) GROUP 1.....................$ 21.31 10.00 GROUP 2.....................$ 23.41 10.00 GROUP 3.....................$ 23.68 10.00 GROUP 4.....................$ 23.95 10.00 GROUP 5.....................$ 24.23 10.00 LABORER (Spokane) GROUP 1.....................$ 21.01 10.00 GROUP 2.....................$ 23.11 10.00 GROUP 3.....................$ 23.38 10.00 GROUP 4.....................$ 23.65 10.00 GROUP 5.....................$ 23.93 10.00 Zone Differential (Add to Zone 1 rates): Zone 2 - $2.00 BASE POINTS: Spokane, Pasco, Lewiston Zone 1: 0-45 radius miles from the main post office. Zone 2: 45 radius miles and over from the main post office LABORERS CLASSIFICATIONS GROUP 1: Flagger GROUP 2: Common or General Laborer; GROUP 3: Mason Tender-Cement/Concrete; Pipelayer; Chipping Guns GROUP 4: Grade Checker ---------------------------------------------------------------- LABO0238-007 06/01/2011 Rates Fringes Laborer, Mason Tender Brick......$ 23.95 9.95 ---------------------------------------------------------------- PAIN0005-003 01/01/2012 Rates Fringes PAINTER (Brush, Roller, and Spray.)..........................$ 18.62 9.45 ---------------------------------------------------------------- * SUWA2009-045 08/07/2009 Rates Fringes CEMENT MASON/CONCRETE FINISHER...$ 17.21 0.00 LABORER: Landscape..............$ 14.67 0.00 OPERATOR: Drill.................$ 28.15 8.20 PIPEFITTER.......................$ 25.98 3.98 TRUCK DRIVER: 10 Yard Truck....$ 24.61 8.34 TRUCK DRIVER: Dump Truck........$ 19.67 0.00 TRUCK DRIVER: Water Truck.......$ 24.36 8.30 ---------------------------------------------------------------- WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental. ================================================================ Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)). ---------------------------------------------------------------- The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union. Union Identifiers An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example. Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rate. Non-Union Identifiers Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date. Survey wage rates will remain in effect and will not change until a new survey is conducted. ---------------------------------------------------------------- WAGE DETERMINATION APPEALS PROCESS 1.) Has there been an initial decision in the matter? This can be: * an existing published wage determination * a survey underlying a wage determination * a Wage and Hour Division letter setting forth a position on a wage determination matter * a conformance (additional classification and rate) ruling On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed. With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to: Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to: Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue. 3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to: Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 4.) All decisions by the Administrative Review Board are final. ================================================================ END OF GENERAL DECISION